Indonesia Conference Directory


<< Back

List of Abstracts

The 3rd International Conference on Sustainability and Innovation (ICoSI 2019)

Event starts on 2019.07.30 for 2 days in Yogyakarta

http://icosi.umy.ac.id | https://ifory.id/conf-abstract/VtN7hkMnz

Page 11 (data 301 to 330 of 1365) | Displayed ini 30 data/page

Description of Professional Behaviours Value of Nursing Student Level II Diploma Program AKPER Nursing Foundation Yogyakarta
Rully Annisa(a*), Shanti Wardaningsih(b), Novita Kurnia Sari(b)

Show More

Corresponding Author
RULLY ANNISA

Institutions
a*) Lecturer Nursing Bachelors Program Universitas Muhammadiyah Cirebon
rully[at]umc.ac.id
b) Lecturer Nursing Masters Program Universitas Muhammadiyah Yogyakarta
b) Lecturer Nursing Masters Program Universitas Muhammadiyah Yogyakarta
South Ring Tamantirto Street, Kasihan, Bantul, Yogyakarta, 55183

Abstract
Background: Professional behaviors are one of the elements that nurse students must have in addition to clinical knowledge and skills, to become professional nurses when they have been in the workplace and nursing professionalism for the present is getting better. The purpose of this study: This study to determine the description of the professional behavior of students in the second level of DIY nursing program AKPER YKY. Research Method: This research use descriptive research method. The sampling technique in this study used incidental sampling amounted to 72 active students. Data were collected using Shieffietd Peer Review Assessment (SPRAT) questionnaire with self assessment technique consisting of 23 Likert-scale questions. Results: The results of the study showed that the value of professional behaviors of nursing respondents consisted of low category 5 students, medium category 1 students, high category 33 students, very high category 33 students. Conclusion: From the results of professional behaviour values that consisted of low category 5 students, medium category 1 students, high category 33 students, very high category 33 students. And can be used as an evaluation for institutions and students on the value of professional behaviour owned, and used as input for the preparation of curriculum about the value of professional behavior.

Keywords
Value of Professional Behavior, Student, Nursing Diploma Program

Topic
International Conference on Nursing

Link: https://ifory.id/abstract/jUJ4rknZNBTq


Descriptive Study Related to The Problems of First-Year Student in Guidance and Counseling Major Academic Year 2015/2016 Education and Science Faculty of Ahmad Dahlan University
Erni Hestiningrum

Show More

Corresponding Author
Erni Hestiningrum

Institutions
Universitas Ahmad Dahlan
Kampus 4 Universitas Ahmad Dahlan, Jl Ringroad Selatan, Tamanan, Banguntapan, Bantul
Email: ernihestiningrum[at]gmail.com

Abstract
Guidance and Counseling Major which is a part of Science and Education Faculty has determined the problems of first-year student in order to improve the learning process. This matter is used as a preventive step related to first-year student. In order to recognize the problems which are happened by the first-year student, it needs Non-Test Assessment Process that is using Problem Check List (PCL). This study has the objective to determine the cases which are experienced by first-year student of Guidance & Counseling Major, Academic Year 2015/2016, Science and Education Faculty of Ahmad Dahlan University. Problem Check List (PCL) is a set of problem probability statement list which is arranged in order to stimulate the problem explanation that is happened towards every individual. PCL through this research has one type that is developed by Ross L. Money. These PCL has 12 fields of problem which each field of problem consists of 30 problem statements. The population of this research is all of first-year student 2015/2016 in Guidance & Counseling Major - Science and Education Faculty in Ahmad Dahlan University. The date of spreading the PCL questionnairre starts from October 6, 2015 until October 17, 2015. The result of this research is known that the problem related to the (1) habit of study is 92%, (2) healthy is 91%, (3) relationship of love is 86%, (4) family is 85%, (5) curriculum adaptation is 83%, (6) social relationship is 82%, (7) religion and moral is 81%, (8) recreation is 81%, (9) school environment adaptation is 81%, (10) private matter is 77%, (11) future life related to job position is 77%, (12) economic situation is 64%.

Keywords
The Problems of Student; Problem Check List

Topic
International Symposium on Social Sciences, Humanities, Education, and Religious Studies

Link: https://ifory.id/abstract/m2tVXquy3URE


DESIGN AND MOTION ANALYSIS OF THE HANDCYCLE AS MODE TRANSPORT TO EASY THE ACCESSIBILITY OF DISABILITY PERSON
Rela Adi Himarosa (a), Sunardi (a)

Show More

Corresponding Author
Rela Adi Himarosa

Institutions
(a) Universitas Muhammadiyah Yogyakarta

Abstract
Handcycle is a transportation tool for individuals with lower limb disabilities. This study designed a hand cycle as a mode of transportation to facilitate the accessibility of persons with disabilities. The design of the handcycle will be designed on a prototype scale. It referred to recumbent and synchronous frame geometry types for arm crank set up to do finite element analysis studies using Autodesk Fusion 360 software to find the value of the strength of the handcycle frame design. Frame dimensions based on anthropometric data. Designed a decent frame at 160 kg loading with a critical value of 330 MPa and became a reference for the handcycle production process.

Keywords
handcycle, disability, frame analysis, FEA

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/MbdaTtghnmEY


Design Control Systems for Jig Rotary Table with Servo Motor on The Spot Welding Machine using the Programmable Logic Controller
Syahril Ardi(1), M. Hidayat (2), Suhartinah(3), Ardi Winata(4)

Show More

Corresponding Author
Suhartinah -

Institutions
Polytechnic of Astra Manufacturing
Jl. Gaya motor raya no.8 Sunter II. Jakarta (14330)

Abstract
In this paper, we design control systems that can control a servo motor on a spot welding machine. As controller, the PLC can control the rotary movement on the jig table. In this case, we design the control system, input and output cabling systems to and from the PLC. There is a request for change in the condenser model, so the spot welding machines are designed and made specifically to be used to perform three times welding process on new type condenser parts. From the testing and result, we find that the rotary table jig on the spot welding machine can move according to the required welding angle i.e. 17. It can do the welding process to reach the new condenser specifications.

Keywords
design control systems;jig rotary table;servo motor;spot welding machine;Programmable Logic Control

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/KR4pMqbTL9EV


Design of E-Tourism Systems Batang Heaven of Asia As Tourism Marketing Media
Ari Muhardono (a*) Danang Satrio (b)

Show More

Corresponding Author
Ari Muhardono

Institutions
University of Pekalongan
Sriwijaya No.3,Pekalongan City
Central Java

Abstract
Batang Regency is a combination of coastal areas, lowlands and mountains and has enormous potential in the field of tourism and culture but limited information makes tourism Batang Regency is not well known among tourists, so the number of tourist visits to the district. Batang has not experienced a significant increase. E-tourism is an application of information and communication technology in the tourism industry. The description of e-tourism is a digitalization in carrying out business processes and value chains in the tourism sector, namely travel agents, hospital and food industries. In its use, e-tourism can optimize and streamline tourism companies. Thus, the use of e-tourism in the business process has changed the value chain and strategic relations with the tourism industry and other companies. E-tourism is a concept that describes the relationship between IT and tourism. The aim to be achieved in this research is to produce E-Tourism so that it can be used to present information about Batang Regency tourism places and interaction service media for tourists and the public. This research is a research and development research. This study aims to develop a district tourism tourist destination through a web-based Tourism Information System (E-Tourism). E-Tourism is aimed at prospective global tourists who want to know tourist information in the Batang Regency. The methodology used for designing and developing this E-Tourism system is a structured methodology with the SDLC (System Development Life Cycle) model.

Keywords
E-Tourism, Tourism, Batang Regency,

Topic
International Symposium on Social Sciences, Humanities, Education, and Religious Studies

Link: https://ifory.id/abstract/btPGMkc7u6vV


Design of Fault Tolerant Control of Wind Turbine Speed Control Based on Bias Fault Estimation with Estimation l0 Norm Constraint
Putri Yeni Aisyah (a*), Katherin Indriawati (b)

Show More

Corresponding Author
Putri Yeni Aisyah

Institutions
a) Department of Engineering Physics, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia
*putriyeniaisyah[at]gmail.com
b)Department of Engineering Physics, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia

Abstract
Wind energy has several advantages including unlimited energy production, can be used as an alternative step to save fossil energy and not cause pollution. The availability of the wind power plant (PLTB) system on onshore reaches 98%, but the required maintenance costs are still very high in the installed Wind Turbine Generator (WTG) system. Whereas, the availability of PLTB on offshore is reduced up to 60% due to the main cause is damage to several components in the WTG system. This study proposes the use of the bias fault estimation method of the WTG system component on a fault tolerant control (FTC) strategy. The advantage of this scheme is that the estimation of bias can be used as a reference to schedule maintenance of the WTG system. Bias estimation method is built using l0 norm constraint optimization. This estimation method has a simple structure because it only uses a single observer. Optimization formulation with l0 norm constraints is derived by applying a compressed sensing technique so that estimation of bias fault can be used to estimate all actuator and sensor components by a single observer. It answers the problem of observability in the case of using a single observer to estimate several errors with limited measurement variables (less than the number of errors estimated).The single observer model used is able to handle the nonlinearity of the wind turbine generator system, so that it can produce state and error estimates properly. The FTC system produces Settling Time and the Maximum Overshoot value is smaller than the conventional control system

Keywords
Compressed sensing, Bias Fault Estimation, Fault Tolerant Control, Wind Turbine Generator

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/WPJK62MFr9eq


Design of Hybrid Micro-hydro and Solar Power Plant for Rural Communities
Ramadoni Syahputra*, Iqbal Rifqi, Rahmat Adiprasetya Alhasibi

Show More

Corresponding Author
Ramadoni Syahputra

Institutions
Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta, Indonesia
*ramadoni[at]umy.ac.id

Abstract
Electricity demands for industries, offices, and rural communities are increasing. This increase is not accompanied by the availability of electricity supply, especially in rural communities. The effort to find the new and renewable energy sources are an option that must be done immediately to overcome the problem of energy needs. Of the many renewable energy sources available, a very attractive option is micro-hydro energy and solar energy. The potential of these two renewables in Indonesia is very large. Combining solar and micro-hydro systems is a good combination for low load applications. The combination of this power plant is very suitable for areas where during the summer the river water flow tends to decrease while the suns heat is more reliable, and conversely in the rainy season the river water flow will increase while the suns energy falls to its lowest level. However, there are still obstacles in the use of these energy sources, namely the cost of distribution and installation is very expensive. Therefore, portable power plants are designed in this study, so that the costs of distribution and installation can be minimized. The designed hybrid power plants have been tested in Tamantirto, Bantul, Indonesia. The test results have shown that the hybrid power plant produces an output power of 170 watts.

Keywords
Solar energy, micro-hydro, hybrid, rural communities

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/UEWNR6ywJhmq


Design of Motorcycle Friction Plate Coupling Using Borland Delphi
Dhitya Ovim Barkley Perdana, Nyenyep Sriwardani, Husin Bugis

Show More

Corresponding Author
Dhitya Ovim Barkley Perdana

Institutions
Universitas Sebelas Maret Surakarta

Abstract
Information/ computer technology is currently experiencing rapid development. Jobs without using a computer will be difficult and require considerable time to complete. The use of information technology / computers increase productivity because various activities can be carried out quickly, and accurately. One of jobs that is quite difficult and takes a long time is designing of motorcycle friction plate clutch. The program was made by translating the plate coupling design procedure into the Delphi programming language. A design program was made by arranging interfaces according to clutch design requirements then giving orders (codes). Deviation or difference in results after cross-checking between manual calculations and program calculation is 0%. The friction plate clutch design program made by Borland Delphi 7 software can work well and calculation or design using the program is more effective than manual calculation because of the shorter time needed.

Keywords
Borland Delphi 7, Program, Clutch Design

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/JKQMEy8PLFmC


Design of Power Monitoring Systems Using Microcontroller Arduino Mega 2560 at Heavy Equipment Company
Agus Ponco Putro; Reza Septiandi; Syahril Ardi

Show More

Corresponding Author
Agus Ponco Putro

Institutions
Politeknik Manufaktur Astra

Abstract
Abstract. In this paper, we design the power monitoring systems at the heavy equipment company. In a production process, the need for pressurized air supply in this company is quite large. In this case it is fulfilled by the operation of 2 compressor units. The compressor used has a working power of 90 KW, so that in its operation also requires a large electricity supply. In the list of company facilities, compressors are machines with the largest energy consumption. With regard to energy efficiency programs, the company plans to reduce energy use from each machine, especially compressors, while paying attention to existing production targets. In this research, the first step taken is by monitoring power usage. This is useful to find out whether the machine is working according to needs, or there are uses that are not to support existing production. For example, the machine turns on when it is not working hours, or there is a machine that is not in good condition. To facilitate this work, we design a compressor power usage monitoring system based on the microcontroller Arduino Mega 2560. In this system, the data taken is the working flow of the compressor using the ACS712 current sensor, which is then processed by Arduino so that the value of power usage is obtained. Next, data is sent via the ESP8266 Wi-Fi module to the database. The output of this system is the value of work flow and compressor working power in real time, along with the total value of power usage by the compressor displayed on a website. Through the site, data can be accessed by PCs or the hand phone that connected to the companys network. The measurement results of this system have a measurement accuracy of 98.48%.

Keywords
Arduino Mega 2560, Monitoring System, Machine Power Consumption, current sensor ACS712, Wifi Module ESP8266

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/37kZE8N2Tepy


Design of Power Monitoring Systems Using Microcontroller Arduino Mega 2560 at Heavy Equipment Company
Agus Ponco Putro; Reza Septiandi; Syahril Ardi

Show More

Corresponding Author
Agus Ponco Putro

Institutions
Astra Manufacturing Polytechnic

Abstract
In this paper, we design the power monitoring systems at the heavy equipment company. In a production process, the need for pressurized air supply in this company is quite large. In this case it is fulfilled by the operation of 2 compressor units. The compressor used has a working power of 90 KW, so that in its operation also requires a large electricity supply. In the list of company facilities, compressors are machines with the largest energy consumption. With regard to energy efficiency programs, the company plans to reduce energy use from each machine, especially compressors, while paying attention to existing production targets. In this research, the first step taken is by monitoring power usage. This is useful to find out whether the machine is working according to needs, or there are uses that are not to support existing production. For example, the machine turns on when it is not working hours, or there is a machine that is not in good condition. To facilitate this work, we design a compressor power usage monitoring system based on the microcontroller Arduino Mega 2560. In this system, the data taken is the working flow of the compressor using the ACS712 current sensor, which is then processed by Arduino so that the value of power usage is obtained. Next, data is sent via the ESP8266 Wi-Fi module to the database. The output of this system is the value of work flow and compressor working power in real time, along with the total value of power usage by the compressor displayed on a website. Through the site, data can be accessed by PCs or the hand phone that connected to the companys network. The measurement results of this system have a measurement accuracy of 98.48%.

Keywords
Arduino Mega 2560, Monitoring System, Machine Power Consumption, current sensor ACS712, Wifi Module ESP8266

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/UhZeku8q6VRg


Design Passive Fault Tolerant Control System for Velocity Control of Modular Servo System MS150DC with Fault at ACtuator and Sensor
Rahajeng Kurnianingtyas(a*), Dr. Katherin Indriawati, ST, MT(b)

Show More

Corresponding Author
Rahajeng Kurnianingtyas

Institutions
(a, b) Engineering Physics Department. Faculty of Industrial Engineering
Sepuluh Nopember Institute of Technology
Surabaya

Abstract
The main equipment in the transportation system is a driving element, such as a DC motor on an electric car. Sensors and actuators used in DC motors are components that are directly related to the environment so that both components are susceptible to damage. Currently the field of Fault Tolerant Control (FTC) has developed, which is a controlling system that can tolerate errors that occur and maintain system performance as desired. One of the FTC methods is Passive Fault Tolerant Control (PFTC). The PFTC method is designed as a robust controlling system from a component error. Robust control works by taking into uncertainties and disturbances in the system. In this case the component error is seen as an unobserved disturbance. However, robust control assumes the measurement data is in accordance with the real conditions, or there is no error in the measuring instrument or sensor. So that when there is an error in the measurement, robust control is not able to maintain the stability and performance specified. In addition, the operating conditions of DC motors with varying load torque exacerbate the DC motor speed response because load torque variations are considered a disturbance that must be muted if using a robust control scheme. Therefore, the control algorithm should be derived from a model involving load torque. However, this requires information about the real condition of the torque load. This research proposes a robust control strategy that is able to resolve actuator errors and sensor errors in the PFTC scheme on DC motor servo systems. The variable that is controlled is the speed with the changing torque load. The control structure used is state feedback with the integrator. To accommodate errors in sensors and actuators, these controllers are equipped with an observer that has a robust characters. Information about changes in load torque is obtained not from the measurement of torque, but through estimation so that the model used by the observer must accommodate this problem. Determination of gain observer is done by linear matrix inequality (LMI) formulation and is treated as a multiobjective optimization problem. PFTC system testing is carried out both simulation and experimental by providing an offset error. The bias error in the actuator can be a disturbance that blocks the current from the servo amplifier (as an actuator) from entering the DC motor. Error bias in speed sensor occurs in tachogenerator. The PFTC system is tested in real time on the MS150DC modular servo system. The PFTC system is better able to maintain performance when there are errors in the actuators and sensors compared to systems without PFTC so that the system response can return to the set point. The PFTC system designed to correct errors that occur in the system with each error value that can be estimated at 70% on the actuator and 73% on the sensor.

Keywords
Robust Control ; Passive Fault Tolerant Control ; Motor DC ;Observer

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/CmNDRxaGvch8


DESIGN SINGLE PHASE INVERTER ON DDS METHODE TO REDUCE CONSUMPTION OF LAMP ELECTRICITY BILLBOARD
TURAHYO

Show More

Corresponding Author
TURAHYO TURAHYO

Institutions
SEKOLAH TINGGI TEKNOLOGI BONTANG

Abstract
Advertising is utilized to provide information to the community in order to attract attention and move the desire to buy goods so as to increase the number of sales of goods or services. Advertising is generally made and placed in strategic places that can be seen both morning and night. To see billboards at night, a good light is necessary. This lighting uses floodlights that require considerable electrical power. Inverters with the DDS method can be utilized to reduce the electrical power requirements for illuminating billboards by reducing the voltage by changing the modulation index on the PWM generator. From the simulation results with a 220 Watt lamp load indicates the output waveform in the form of pure sinusoidal voltage. The output voltage is 223 volts and the current is 2.23 A at a frequency of 50 hz with a modulation index of 0.8. The condition of illumination light is brightly normal, while the 0.6 modulation index produces a 170 volt voltages and a current of 1.7 A with dimmed lighting. Electricity consumption of lighting using an inverter has decreased by 24%.

Keywords
Electricity Billboard, Single Phase Inverter, Digital Direct Synthesis, PWM.

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/PnahyXfMNxGV


Designing an Ultrasonic Sensor Stick Prototype for Blind People
Sularso Budilaksono(a"), Bias Bertino (b*), I Gede Agus Suwartane (c*), Ahmad Rosadi (d*), M. Anno Suwarno (e*), Susi Wagiyati Purtiningrum (f*), Yunitasari (g*), Erwin Suhandono (h*), Essy Malays Sari Sakti (i*), Dian Gustina (j*), Andri Agung Riyadi (k*)

Show More

Corresponding Author
Sularso Budilaksono

Institutions
(a) Informatics Department, University of Persada Indonesia YAI
Jalan Diponegoro 74 Jakarta
*sularso[at]upi-yai.ac.id
(b) Teknik Informatika Fakultas Teknik, Universitas Persada Indonesia YAI
Jalan Salemba Raya no 7/9 Jakarta
*biasbertino95[at]gmail.com
(c) Teknik Informatika Fakultas Teknik, Universitas Persada Indonesia YAI
Jalan Salemba Raya no 7/9 Jakarta
*agus.suwartane[at]gmail.com
(d) Teknik Informatika Fakultas Teknik, Universitas Persada Indonesia YAI
Jalan Salemba Raya no 7/9 Jakarta
*kangahmad[at]yahoo.com
(e) Teknik Informatika Fakultas Teknik, Universitas Persada Indonesia YAI
Jalan Salemba Raya no 7/9 Jakarta
*suwarno[at]upi-yai.ac.id
(f) Teknik Informatika Fakultas Teknik, Universitas Persada Indonesia YAI
Jalan Salemba Raya no 7/9 Jakarta
*susi_wagiyati[at]yahoo.co.id
(g) Teknik Informatika Fakultas Teknik, Universitas Persada Indonesia YAI
Jalan Salemba Raya no 7/9 Jakarta
*sari_nita[at]yahoo.com
(h) Teknik Informatika Fakultas Teknik, Universitas Persada Indonesia YAI
Jalan Salemba Raya no 7/9 Jakarta
*erwin.suhandono[at]upi-yai.ac.id
(i) Teknik Informatika Fakultas Teknik, Universitas Persada Indonesia YAI
Jalan Salemba Raya no 7/9 Jakarta
*emalays[at]yahoo.com
(j) Teknik Informatika Fakultas Teknik, Universitas Persada Indonesia YAI
Jalan Salemba Raya no 7/9 Jakarta
*dgustina77[at]gmail.com
(k) Magister Ilmu Komputer, STMIK Nusa Mandiri
Jalan Kramat Raya 18, Jakarta
*andriagu1603[at]nusamandiri.ac.id

Abstract
A blind people needs special attention because it is increasingly difficult to carry out activities carried out in everyday life. This study aims to develop a tool that can be used to detect obstacles for blind people using the HC-SR04 ultrasonic sensor. The prototype of a blind visual aid is a stick that uses Arduino and an Ultrasonic Sensor. The hardware consists of a minimum ATmega328 system as the main controller, an Ultrasonic Sensor HS-SRF04 as an object detection, LM2596 Regulator Module is a kind of Switched Mode Power Supply (SMPS) which is used to reduce DC voltage levels, the barrier detection stick for working blind based on trials for several blind people. This stick is able to give a warning to the user when finding objects that are 7cm apart in front of the user.

Keywords
blind people, ultrasonic sensors, prototypes, warnings.

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/Q2pLnAmTEghy


Designing education based on al-Quran in Islamic university
Yayat Suharyat; Muzayyanah Yuliasih; Agustina

Show More

Corresponding Author
Muzayyanah Yuliasih

Institutions
UNISMA Bekasi
STP Aviasi Jakarta

Abstract
Education is a passion for the struggle of every nation to have equality in mutual relations between nations. In addition, education is the most strategic method in building national character. One of the potential levels of education in character building is college. Therefore, universities are required to reverse their education systems, especially curriculum that are used so they can change the culture of life to have the nature and attitude of fighting in the performance of nation and state development. This study aims to answer the design of education at the Islamic University based on Al-Quran and its correlation with the ideology of Indonesia, Pancasila, in building the character of the nation. The type of research chosen is library research, because the data source used is entirely from the library or documentative. Namely reviewing data sources consisting of literature relating to the theme. The results of the study answered that education based on Al-Quran serves as an introduction, habituation, and planting of noble character values to students in order to build human faith and fear God. The formation of the character of students is very important and should not be ignored by anyone for the future of the nation and the maintenance of religion with the method of ushasan hasanah which is soft-power.

Keywords
education based on Al-Quran, Islamic University, education

Topic
International Conference on Islamic Studies in the Digital Era

Link: https://ifory.id/abstract/D6JjGLNMWqXc


Designing English Presentation Materials for the Students of Islamic Economics and Business Sunan Kalijaga State Islamic University Yogyakarta
FIKRY

Show More

Corresponding Author
FIKRY -

Institutions
Center for Language Development
State Islamic University of Sunan Kalijaga

Abstract
The study aimed at designing effective learning materials of English Presentation for the students of Islamic Economics and Business, Sunan Kalijaga State Islamic University. The English presentation is one of courses at the bridging course program held by the faculty of Islamic Economics and Business, Sunan Kalijaga State Islamic University. This course is to help students improve their public speaking skills when they are delivering presentation for academic papers or businesses. This study was a research and development covering needs analysis, syllabus and material development. Needs analysis was conducted to obtain more input about syllabus and materials development. To identify what students need in the course, the needs assessment questionnaire and interview were developed based on ESP Needs Analysis by Hutchinson & Waters (2008) and Nunan (2004). After conducting needs analysis, it is essential to propose an ESP course syllabus that is well suited to the needs of the students. Then, The materials design was developed by the teaching principles of Genre-based approach and task development model by Nunan (2004). This study will contribute significantly to curriculum and materials developers, teachers, and students interested in EFL learning.

Keywords
designing learning materials; English presentation; Needs Analysis; Syllabus; materials design

Topic
International Conference of English Language Teaching, Literature & Linguistics

Link: https://ifory.id/abstract/Z8LkbYB3UQFW


DESIGNING VIDEO MATERIAL: FLEXIBILITY AND AUTHENTICITY IN ENGLISH LESSON
Restu Arini

Show More

Corresponding Author
Restu Arini

Institutions
English Education Department, Universitas Mercu Buana Yogyakarta

Abstract
The use of technology in education is believed effective to stimulate and improve students- comprehension, engagement, and autonomy in learning. It can also be the answer of the problem where time allocation cannot accommodate the whole material. Therefore, this study focuses on developing an English video-based material as the main media in teaching English to the freshmen. It is also intended to measure the improvement of the students- mastery of English. This study applies Multimedia Development Life Cycle (MDLC) model which consists of six steps, namely concept, design, obtaining materials, assembly, try-out, and distribution. IT involves the freshmen or first semester of university students from any kinds of major. The findings shows that the designed-video can support the teaching learning progress in the terms of content, instructional plan, and technical production which improves not only the students- performance both in written and oral but also their positive attitude in learning.

Keywords
Media design, autonomy learning, distance learning. video-based material

Topic
International Conference of English Language Teaching, Literature & Linguistics

Link: https://ifory.id/abstract/HFDP7T34pgby


DETECTION OF PRIMARY METABOLITS ON VERMICOMPOST IN RAW MATERIALS OF SOYBEAN HUSK WASTE AND COW MANURE
Sri Mursiani Arifah(1,2), MTh.Sri Budiastuti (2), Widyatmani Sih Dewi (3), Supriyadi (4)

Show More

Corresponding Author
Sri mursiani Arifah

Institutions
1. Sebelas Maret University, Department of Agriculture Science, Graduated School, Surakarta, 57126, Indonesia
2. Muhammadiyah University, Faculty of Agriculture, Department of Agrotechnology, Malang,Indonesia

Abstract
Waste of soybean husk seeds (SHS) is very potential organic waste to be used as organic fertilizer through vermicomposting techniques. To find out the potential, it is necessary to characterize the vermicompost metabolites produced, because by detecting metabolites it will be useful in studying the profile and its metabolic pathway. Gas Chromatography-Mass Spectroscopy (GC-MS) is used to detect metabolites because it is a powerful tool in characterizing vermicompost. The purpose of this study is to detect vermicompost metabolites made from raw materials of SHS waste and combination with cow manure. Thus, further information obtained can be used as a recommendation in handling SHS waste specifically as organic fertilizer through vermicomposting techniques. The study of vermicomposting was conducted using Randomized Block Design (RBD) with 5 treatments and 5 repetition. The treatment details are: V1: SHS waste (100%), V2: cow manure (100%), V3: SHS waste: cow manure (50%: 50%), V4: SHS waste: cow manure (75 %: 25%) and V5: SHS waste: cow manure (25%: 75%). Data were analyzed using GC-MS and Honestly Significant Difference (HSD) test. Based on the analysis using GC-MS in all treatments (V1-V5), there were detected metabolites classified as primary metabolites, consisting of: seven sugar compounds, 20 amino acid compounds, nine vitamins, three hormones and 43 organic acids. The treatment showed an increase in the chromatogram start of treatment V1-V5, and this result is directly proportional to HSD test where V5 treatment also showed the highest total curve. Key words: vermicompost, soybean husk, cow manure, GC-MS Abbreviations: SHS : soybean husk seed, GC-MS : Gas Chromatography-Mass Spectroscopy  

Keywords
vermicompost, soybean husk, cow manure, GC-MS

Topic
International Conference on Sustainable Agriculture

Link: https://ifory.id/abstract/NyR96Jgcmkzt


Determinant Analysis of Bullying among School Age Children in Yogyakarta
Nina Dwi Lestari, Nia Ayu Lestari, Ensi Qoriati Ningrum, Karisma Puspita Tri Anggraini

Show More

Corresponding Author
Nina Dwi Lestari

Institutions
School of Nursing, Faculty of Medicine and Health Sciences, Universitas Muhammadiyah Yogyakarta

Abstract
Bullying is a very common, complex and potentially damaging among school age children. The current case of bullying is a serious problem especially in the school age group because the incidence has increased from year to year, especially in Yogyakarta. This study aims to determine the factors that influence the occurrence of bullying among school-age children in Yogyakarta. The research method used was quantitative with a cross-sectional design in 114 school-age children in one of the elementary schools in Yogyakarta. The samples were taken by simple random sampling technique. The research instrument uses a questionnaire. Data were analyzed using Chi-Square Test. The results showed that the bullying incidence was 51.8% dominated by the type of physical bullying which amounted to 62.7%. There was no significant relationship between sex (p value = 0, 490), parenting style (p value = 0.778) with the incidence of bullying in school-age children. There is a significant relationship between school factors (p value = 0.001), peers (p value = 0.024), intensity of watching television shows (p value = 0.026) with the incidence of bullying in school-age children. It is expected that schools and community health nurses have a role in controlling bullying that occurs in schools.

Keywords
School Age Children, Bullying, Parenting, Television Shows, School Factors, Peer

Topic
International Conference on Nursing

Link: https://ifory.id/abstract/yBZurHtdMUCp


Determinants of Crowdfunding Campaign Success in Malaysia
Naimah binti Zaini, Rahayu binti Abdul Rahman

Show More

Corresponding Author
NAIMAH ZAINI

Institutions
Universiti Teknologi MARA, Perak Branch, Tapah Campus

Abstract
Crowdfunding is a rapidly growing phenomena and is becoming a viable alternative to traditional financial institutions for micro, small and medium business fund seekers. However, success of crowdfunding efforts is crucial for its survivals. This study examines various factors that influence success of crowdfunding project campaign. The data are collected from approved crowdfunding platforms in Malaysia. The results show that size of the network, posting updates and pledging behavior have positive and significant relationship with crowdfunding campaign success.

Keywords
Crowdfunding, small and medium business, Malaysia

Topic
International Conference of Islamic Economic and Financial Inclusion

Link: https://ifory.id/abstract/nfzpG7DX2uPk


Determinants Of The Islamic Financial Literacy Index: Comparison Based On Ethnographic Studies
Miftakhul Khasanah

Show More

Corresponding Author
Miftakhul Khasanah

Institutions
Universitas Muhammadiyah Yogyakarta

Abstract
The inconsistency of the results of previous studies regarding the factors that influence the level of financial literacy in both general and Islamic financial literacy attracted researchers to conduct this research. Demographic factors such as gender, education level, income level and so on are factors that are often used in this type of research. Changes that occur in the community go according to patterns of change, especially seen in the attitudes and behavior of community members who are more often influenced by specific cultural groups or communities. Islamic financial literacy indicators are arranged in constructs of knowledge, skills, beliefs, attitudes, and behavior based on aspects of religiosity and Maqasid al-Shariah. The communities that were compared in this study were the temporary sellers community in Malioboro, Yogyakarta City and the ASN (State Civil Apparatus) community of the Regional Government in Wonosari City Gunung Kidul. The determination of the Islamic financial literacy index is carried out by the survey method. The data in this study uses primary data and secondary data. Primary data is data obtained directly from interviews and distribution of tests and questionnaires. Then the factors that influence the Islamic financial literacy index are carried out using ethnographic studies.

Keywords
Determinants, Islamic Financial Literacy, Behavioral Patterns, Ethnographic Studies

Topic
International Conference of Islamic Economic and Financial Inclusion

Link: https://ifory.id/abstract/nER9NQuKkZHw


DETERMINATION OF AGRONOMIC CHARACTERS FOR LINE SELECTION IN POTATO CROSSING
Erny Ishartati (a), Sufianto(a), Aulia Zakia(a), Made Jane Mejaya(b), Rudy Madiyanto(c)

Show More

Corresponding Author
Erny Ishartati

Institutions
(a) University of Muhammadiyah Malang.
Jl. Raya Tlogomas 246 Malang [65144] Indonesia

(b) Indonesian Legumes and Tuber Crops Research
Insitute Jl. Raya Kendalpayak km 8, Malang [65101]
Indonesia
(c) Reseacher, Indonesia

Abstract
Selection is the activity of selecting individuals the best plants based on the desired character. Selection will be effective if the right selection character is used. The aims of this study to determine agronomic characters that can be used as character selection in the cross-bred potato line population through heritability, genetic diversity, genotypic correlation, and selection of these lines. The experiment was conducted at the Green House, Sumber Brantas Village, Batu City, East Java. The materials used were 30 lines of potatoes as a result of the LJPRSD1 x AP-4 varieties crossing. The experimental design used in this study was a completely randomized design (CRD) with 3 replications. Observed agronomic characters were plant height, stem diameter, number of leaves, tuber diameter, number of bulbs, length of bulbs, weight per-bulb, starch content, and glucose. The result of heritability in almost all characters had a high value, except for the character of stem diameter and tuber length. Genotypic diversity in the character of stem diameter, bulb diameter, bulb length are low, while other characters are rather-low. Significant genotypic correlations between characters, except starch-content, to the weight per-bulb character. Agronomic characters that can be used as character selection are plant height, tuber diameter, and number of tubers.

Keywords
agronomic character, heritability, genetic diversity, genotypic correlation

Topic
International Conference on Sustainable Agriculture

Link: https://ifory.id/abstract/bHPUThrJaAgW


Determination of Land Subsidence Caused by Land Use Changing in Palembang City using Remote Sensing Data
Sumi Amariena Hamim (a), Annisa Kurnia Shalihat (a) and Fathoni Usman (b*)

Show More

Corresponding Author
Fathoni Usman

Institutions
(a)Universitas Indo Global Mandiri, Palembang 30129, Indonesia
(b)Institute of Energy Infrastructure, Universiti Tenaga Nasional, Kajang 43000, Selangor, Malaysia
fathoni[at]uniten.edu.my

Abstract
Palembang City is located at lowland where 70% of the city has an elevation from 0 to 5 m above mean sea level. With tremendous development and land use change, Palembang City has faced more problems with a flash flood and a larger inundated area. This paper presents a study on the subsidence on Palembang City using remote sensing data. The SAR data set and the optic data set were used in this study. From the study, it is found that within a decade the land use changing in Palembang City obviously a presence. The land subsidence causes the further problem of inundated area worsens the existing runoff water discharge which controlled by the tide of Musi River. The predicted inundated area due to land subsidence is presented in this paper as well.

Keywords
Remote sensing; Land subsidence, Land use changing, Flood

Topic
International Symposium of Civil, Environmental, and Infrastructure Engineering

Link: https://ifory.id/abstract/MJeLHG2EgyKR


DETERMINING NUTRITIONAL AND HEALTH HABITS OF BAJAO PEOPLE IN RELATION TO THEIR HEALTH STATUS: BASIS FOR HEALTH EDUCATION
Abdullah Junior S. Mangarun, Wraida D. Bacarat, Jomaira U. Hadji Jamil

Show More

Corresponding Author
Abdullah Junior Serad Mangarun

Institutions
Mindanao State University-Iligan Institute of Technology

Abstract
Healthy diet and physical activity are proven to be key to a good nutrition and significant for a healthy and long life which everybody aspire to have. Eating nutrient-rich foods and maintaining a healthy lifestyle is essential in all stages of life. This study determined the demographic profile, level of knowledge regarding treatment of common health concerns and the significant relationship in Bajao people nutritional habits in relation to their health status. The study made use of descriptive research design. Both standardized and self-made questionnaire were used to gather data. The study was conducted in Tambacan, Iligan City were Bajao people reside. The study utilized purposive sampling wherein respondents are selected based on the criteria necessary to answer the objectives of the study. The respondent should be at least 12 years old and recognized by the tribe leader as member of the Bajao community. Results revealed that there was no significant relationship between the health status of the respondents and their personal food intakes. 133 of the respondents do not eat the food choices given regardless of their Body Mass Index. Moreover, there was a significant association between their health habits and their health status. It was strengthened by the result that 115 out of 150 respondents said they do not smoke, and 131 out of 150 said that they are not drinking alcoholic beverages. Lastly, there was no significant relationship between their level of knowledge and health status. This was evidenced by the fact that there were 76 out of 150 respondents only knew 1 medicine to cure out of five common diseases, 60 mentioned 2 medicines, and only 14 of the respondents knew 3 medicines out of five common diseases introduced. The study concluded that their nutritional habits cannot be a determining factor for their health status specifically risk for having diet-related health concerns, but health education could still create impact in regards with disease prevention and medical treatment awareness. Creation of significant awareness programs and activities focusing directly to Bajao people of Barangay Tambacan in Iligan City by the Local Government Unit and Non-Government Organizations are highly recommended.

Keywords
Nutritional habits, Health status, Bajao

Topic
International Conference on Nursing

Link: https://ifory.id/abstract/cavFwD4GtqQx


Determining on fresh and hardened properties of self-compacting concrete due to the use of various size and percentages of coarse aggregate and chemical admixtures
Nursiah Chairunnisa (a*), Wiku A Krasna (a), Dwi Nurdiansyah (a)

Show More

Corresponding Author
nursiah chairunnisa

Institutions
(a) Civil Engineering Program, Engineering Faculty, Lambung Mangkurat University, Indonesia
nursiah.chairunnisa[at]ulm.ac.id

Abstract
Self-compacting concrete (SCC) is a type of concrete which can spread grout of concrete into the mold or formwork without the need of vibrator. Assessing the properties of the grout of SCC is an essential factor for the successful of SCC technology. The objective of this study was to evaluate the effectiveness of various coarse aggregate sizes, and chemical admixtures in producing of SCC. There are three main factors to determine the capability of fresh grout of concrete as SCC namely filling ability, passing ability, and segregation resistance. For this purpose, two chemical admixtures that contain 0.5%, 1.0% and 1.5% by weight of cement also two sizes and percentages coarse aggregates were investigated. Cylindrical molds of 100x200mm were utilized to cast cylinder specimens. Workability of grout concrete was investigated with using Flow test, J-Ring, and L shape test that based on EFNARC standard code for determining fresh concrete and compressive test of hardened concrete. To achieve the objectives of research, casting, and testing of the various type of SCC mixture was carried out. The test results will be compared with different code values for determining the properties of fresh and hardened concrete of SCC

Keywords
coarse aggregate, characteristics SCC, chemical admixtures, cylinder specimens, fresh and hardened concrete

Topic
International Symposium of Civil, Environmental, and Infrastructure Engineering

Link: https://ifory.id/abstract/h2nUDw8LgCuN


Determining the Criteria of Air Hub in Indonesia using Analytical Hierarchy Process (AHP)
Gito Sugiyanto (1*), Purwanto Bekti Santosa (1), Mina Yumei Santi (2)

Show More

Corresponding Author
Gito Sugiyanto

Institutions
1 Jenderal Soedirman University, Civil Engineering Department, Mayjend Sungkono Street km.5, Blater, Kalimanah, Purbalingga, Central Java, Indonesia.
2 Health Polytechnic Ministry of Health of Yogyakarta, Mangkuyudan Street MJ III/304 Yogyakarta, Indonesia.

Abstract
Provision of infrastructure that encourages national connectivity will reduce transportation costs and logistic costs so that it can increase product competitiveness and accelerate the economic growth. Application of the optimum hub and spoke airport model will improve the efficiency of transportation costs and the effectiveness of air transport logistics distribution. The efforts are made by examining the parameters or criteria used to establish an airport as a hub airport. The aim of this research was to determine the parameters or criteria for establishing an airport as a hub airport using Analytical Hierarchy Process (AHP) method. The study location was in five international airport designated as Open Sky airport in Indonesia namely Soekarno-Hatta International Airport in Cengkareng, Kuala Namu International Airport in Deli Serdang, Juanda International Airport in Surabaya, Ngurah Rai International Airport in Denpasar, and Sultan Hasanuddin International Airport in Makassar. Five parameters or criteria for determining an airport become a hub airport i.e.: airport charges/cost, cargo handling capacity, time used for handling cargo, value-added service, and location and infrastructure aspect. The most influential parameters or criteria is airport charges/cost that include: landing fees, airport parking fees, and security charges with the value weight is 23.76%.

Keywords
Hub and spoke; airport; cargo handling; airport parking fees; Analytical Hierarchy Process

Topic
International Symposium of Civil, Environmental, and Infrastructure Engineering

Link: https://ifory.id/abstract/8fkBnpvEcYXq


Determining The Threshold Value for Identification of The Goblet Cells in Chicken Small Intestine
Dedi Sepriana (a*), Kusworo Adi (b), Catur Edi Widodo (b)

Show More

Corresponding Author
Dedi Sepriana

Institutions
a) Master of Information System, Diponegoro University
Semarang, Indonesia
*dedisepriana[at]gmail.com
b) Department of Physics, Diponegoro University
Semarang, Indonesia

Abstract
The health condition of chicken intestines can be seen from the number of goblet cells found in the small intestinal epithelium. The cell identification is required to count the number of goblet cells and in the most cases, identification of goblet cells is carried out through a microscope directly. Although the directly identification saves costs, but the implementation not only takes a lot of time and energy but also is relatively subjective. Here we seek to design a system that can identify goblet cells automatically through segmentation by using two threshold values. The two threshold values are obtained from the gray scale images. Gray scale image is defined as the result of extraction of the Hue component in HSV type images. Goblet cells as the main producer of mucin can be colored in the processing of tissue preparation by using AB-PAS staining technique. This technique turns out the mucin into blue, so the identification of goblet cells can automatically be conducted by extracting blue features. After that we decide the lower and upper threshold values from the results of extraction which show the object as a goblet cell. In conclusion, we provide the results that the threshold value to separating object from other networks is on the uint8 gray scale, with value 176 to 221. The segmentation using two threshold values proves that the system is able to identify the goblet cells properly.

Keywords
Goblet cell; RGB to HSV conversion; Hue component extraction; Multilevel thresholding

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/ynfm3AVCYqkh


DEVELOPING COOPERATIVE INTEGRATED READING AND COMPOSITION (CIRC) WEBLOG MATERIALS FOR THE SECOND GRADE STUDENTS OF MAN 1 YOGYAKARTA
Annida Nurul Faiza Asni, Suwarsih Madya

Show More

Corresponding Author
Annida Nurul Faiza Asni

Institutions
Universitas Negeri Yogyakarta

Abstract
This research study was aimed at developing cooperative integrated reading and composition (CIRC) weblogs materials for the second grade students of MAN 1 Yogyakarta. The development was carried out through ADDIE stages. The qualitative data were analyzed using the descriptive analysis while the quantitative data were analyzed through the descriptive quantitative analysis which was converted to the qualitative data. The result showed that the materials could provide more texts which were closely related to student life and more practices on grammar, vocabulary, and generic structure of the text. However, the weblogs materials should be more adaptive to the learning process. Hence, the materials were improved by adding more games, giving direct feedback, simplifying instructions, minimizing essay questions, and giving examples or demonstration before working with the assignments. Through the development of the products, the learning process became more conducive since there was improvement on the student interaction and motivation.

Keywords
weblogs, reading, writing, learning materials

Topic
International Conference of English Language Teaching, Literature & Linguistics

Link: https://ifory.id/abstract/ZDLUYuQtVEha


DEVELOPING E-MODULE FOR ENGLISH LANGUAGE TEACHING (R&D STUDY AT TEN GRADE STUDENTS OF SMAN 3 MATARAM)
Subari

Show More

Corresponding Author
Subari Subari

Institutions
Universitas Mataram; SMAN 3 Mataram

Abstract
This study was categorized as Research and Development (R&D). Its purposes to develop an e-module for ELT and to see to what extent is the use of e-module effective in improving English ability of ten grade students. The population of this study was ten grade of SMAN 3 Mataram in 2018/2019 Academic Year. There were two classes taken as the samples which they were distinguished into experimental group and control group. The students in both groups were choosen using cluster random sampling technique. Students in both groups were given a pre-test to know their background knowledge of English. Both groups were given different treatments, the experimental group was taught using word e-module, whereas the control group was taught using module. In measuring the effect of treatments, both groups were given a post test. Then, the researcher calculated the score of students and described the results based on the value of t-test as well as the teaching and learning process. The findings show that in confidence level of 0,05 (96%) and in the degree of freedom (df) 66, the value of t-test (2,642) is higher than the value of t-table (1,996). It represents that e-module brings about significant effect toward students English ability.

Keywords
Research, Developing, e-module, ELT

Topic
International Conference of English Language Teaching, Literature & Linguistics

Link: https://ifory.id/abstract/t3LpCyZgbf64


Developing FinTech and Islamic Finance Products in Agricultural Value Chain
R. Gratiyana Ningrat & Mohammad Soleh Nurzaman, Ph.D

Show More

Corresponding Author
R. Gratiyana Ningrat

Institutions
University of Indonesia

Abstract
To meet the global population needs, it is projected to at least eighty billion dollars in investment per year to support the food security until 2050. It is widely known that the agriculture financing growth has stalled due to many reasons. Islamic finance has potential to spur the growth of agriculture financing to promote global food security. Meanwhile, agriculture in Indonesia is still nowhere to its potential. It is hindered by an inefficient and underdeveloped downstream segment, low access to financial and technology. This is a huge opportunity for Islamic finance in helping to bridge the gap through value chain finance approach as one of the strategy to reduce risk and give socio-economic spill-over effect along the chain. Islamic finance can promote agricultures sustainability and a more efficient process with FinTech enabled platform. The multiple case study proposes a sharia compliant community based financing model in agricultural value chain practice with FinTech enabled platform. The result is this model integrating all actors from different market segmentation (landowners, suppliers, farmers, brokers, retailers, investor) into an Islamic value chain financing platform. However, determining buying intention, partnership establishment, and technology infrastructure are pivotal for its future implementation.

Keywords
agriculture, value chain finance, financial technology, Islamic finance

Topic
International Conference of Islamic Economic and Financial Inclusion

Link: https://ifory.id/abstract/3HmFd6yqj2pJ


Developing Scientific Character through Empowerment of Shame Culture in Higher Education
Izzatul Mardhiah (a*), Andy Hadiyanto (a), Ahmad Hakam (a), Amaliyah (a), Dewi Anggraeni (a)

Show More

Corresponding Author
Ahmad Hakam

Institutions
a) Fakultas Ilmu Sosial, Universitas Negeri Jakarta
Jl. Rawamangun Muka, Jakarta 13220, Indonesia
andy-hadiyanto[at]unj.ac.id

Abstract
The influence of digital era in Islamic education is significant. It has been developing the quality of human resources, accelerating the process of searching knowledge, and affecting demographic and social value aspects. This change drives the Islamic education curriculum to adjust with the challenges and needs in the digital era. Development of scientific character becomes the main base for the outcome of education. Scientific character is manifestation of scientific work ethos which includes physical and psychical in implementing and creating science, technology, and art. Scientific work ethos is empowered through fostering shame attitude. This research uses descriptive qualitative approach. The data were collected by using interview and questionaire. To support data analysis, data triangulation was used. The sampels were the students of Islamic Education Study Program of Universitas Negeri Jakarta, who were selected by sampling quota technique. The research results show that, in developing the scientific character through shame culture, there are reinforcing components or stimuli that help the process. These reinforcements or stimuli are religious doctrine, reward, and punishment. These components serve as a drive or motive for certain thought or action related to shame and are religiously or socially influenced. The empowering and habitualizing aspects are 1) the factors which trigger shame in academic activities, 2) the factors that maintain the shame culture in relation to God, other people and self, 3) the function of shame culture to motivae positive behavior, and 4) the function of shame or fear as a control and filter in creating and implementing science, technology, and art.

Keywords
Scientific character, shame culture, religious doctrine, rules, punishment

Topic
International Conference on Islamic Studies in the Digital Era

Link: https://ifory.id/abstract/KnCQh9EbmX8D


Page 11 (data 301 to 330 of 1365) | Displayed ini 30 data/page

Featured Events

<< Swipe >>
<< Swipe >>

Embed Logo

If your conference is listed in our system, please put our logo somewhere in your website. Simply copy-paste the HTML code below to your website (ask your web admin):

<a target="_blank" href="https://ifory.id"><img src="https://ifory.id/ifory.png" title="Ifory - Indonesia Conference Directory" width="150" height="" border="0"></a>

Site Stats