Optimizing Machining Time for CAD / CAM Milling Programming Using the Taguchi Method
Mulyadi (1*), Wahyu Alfiansyah (2), Ali Akbar (3), Rachmat Firdaus (4)

(1,3,4) Dept. of Mechanical Engineering, Universitas Muhammadiyah Sidoarjo
(2) Mechanical Engineering Laboratory, Universitas Muhammadiyah Sidoarjo
Jalan Raya Gelam 250 Candi, Sidoarjo 61271, Indonesia
*mulyadi[at]umsida.ac.id

Abstract

The CNC milling machining process is a very important process in manufacturing products because it affects the profitability of the production process. CAD / CAM programming software tools speed up the process and predict production process time. This study uses CAD / CAM simulation of HSM operations and uses the Taguchi method which is a method that can optimize process variables to get a good response. Process variables chosen are Speed, feed rate, depth of cut, step over, stay on surface and radius link. The type of tool used is an endmill with a diameter of 20 mm SECO Jabro-Solid-JS554 standard. The results of the study stated that the HSM machining simulation process that had a greater influence on machining time was feeding 680 mm / minute and 5 mm depth of cut. The experimental results confirm the ideal time produced is 34.25 minutes.

Keywords: CNC milling, CAD / CAM, feed rate, depth of cut, Taguchi method, HSM

Topic: Mechanical Engineering

Link: https://ifory.id/abstract-plain/DmaFnxwGXvy7

Web Format | Corresponding Author (Mulyadi Bin Sati"i Ramikan)