Indonesia Conference Directory

Corresponding Author
FAKHRIDA KHAIRAT FAKHRIDA

Institutions
Poltekkes Kemenkes jambi

Abstract
The right lighting is needed in every workplace so as to avoid accidents and occupational diseases. LDE lamp is an energy-saving lamp that is right for use in the workplace, but it is not yet known which type of lamp is best used so that workers are able to see work objects. the market is very much in the form of TL LEDs, LED bulbs, LED PAR (compact), and LED Bulb (halogen) This study was a quasi-experimental study with a posttest pre-test design with 6 repetitions, and the number of research objects was 24 people who were in accordance with the inclusion criteria. The purpose of this study was to see differences in the ability to see objects before and after the installation of various types of lights. The type of lamp used is TL LED, LED Bohlamp, LED PAR and LED Bulb. The ability to see using a visual acuity test with a snellen card, carried out by Dr. The analysis used for different tests before and after using the Wilcoxon Signeg Ranks Test. To determine the effect of the four types of lights, the Kruskal Wallis Test was carried out, while to determine the type of lamp with different changes, the Man Withney Test was used. The results obtained there are differences in the ability to see objects on TL LED lights, PAR LEDs and LED Bulp. There is no difference in the ability to see when using a Bohlamp LED light, and there is the influence of various types of lights on the ability to see objects. Types of lights that change different LED Bulbs and TL LEDs, TL LEDs and LED PAR, TL LEDs and LED Bulbs. It is recommended to paint the walls with white and not shiny

Keywords
viewing ability, TL LED lights, LED Bohlamp, LED PAR and LED Bulb

Topic
OCCUPATIONAL AND HEALTH SAFETY

Link: https://ifory.id/abstract/B2b3MghcXEHN

Corresponding Author

Institutions
STIKes Bhakti Mandala Husada

Abstract
Metal manufacturing industry is one industry that has a high risk for work accidents, both minor accidents, moderate, or severe accidents. Potential hazards that must be minimized so that workers can protect their safety and health. One way that can be used to overcome the danger is to use personal protective equipment (PPE). This study aims to analyze the work accidents that are removed by workers fingers. Research using qualitative methods with case studies on workers who have work accidents. The main informants are workers who repair work accidents, while supporting informants are HSE managers in the industry. Data obtained through interviews conducted with key informants and supporting informants. Based on research data that can be done by workers who are disconnected in the finger segment due to being twisted by the threads that have been wasted from the gloves they use. At that time, the informant was looking for workpieces using a rotating machine. The informant is not aware of the thread being unraveled and takes machine turns so that it wraps around the fingers. The informant only knows that the finger was finished after finishing and took off the gloves. Inappropriate use of PPE will oppose workers. In addition, workers do not need work safety instructions, thus increasing the risk of workplace accidents.

Keywords
occupational accident, personal protective equipment, occupational injury,occupational health and safety, occupational broken finger

Topic
OCCUPATIONAL AND HEALTH SAFETY

Link: https://ifory.id/abstract/pb3HCAXnZyqP