Indonesia Conference Directory

Corresponding Author
BAHRAH BAHRAH

Institutions
a) Postgraduate Applied Midwifery Poltekkes Kemenkes Semarang, Jl. Tirto Agung Pedalangan Banyumanik, Semarang 50268, Indonesia
*rha_poe[at]yahoo.co.id
b) Department of Physics Faculty of Mathematics and Natural Sciences Diponegoro University, Jl. Prof. Soedarto, SH Tembalang, Semarang 1269, Indonesia

Abstract
The occurrence of hormonal reproduction disorders in women is one of the risk factors for the occurrence of infertility which influences the process of folliculogenesis. Hormonal disorders need to be overcome through conventional medicine, one of which is FSH hormonal therapy as a follicular development therapy for triggering ovulation. But FSH therapy has the risk of ovarian hyperstimulation side effects, high maintenance costs, emotional burdens, and unsatisfactory results so that it requires other alternative ways which are more economical and have no side effects. Red fruit or Pandanus Conoideus is a typical Papuan plant that has many compounds, one of which has essential compounds needed for the female reproductive system. This study analyzed the amount, diameter, and area of de graaf follicles after being given red fruit oil extract in infertile female mice. The results showed that the red fruit oil extract had an effect on the number, diamater, and area of de graaf follicles with p value

Keywords
Folliculogenesis process; Follicle de graaf; Red fruit

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/R6ekgvQxLtj7

Corresponding Author
Sagiran Kromo Sukardi

Institutions
Faculty of Medicine, Muhammadiyah University of Yogyakarta, Indonesia

Abstract
Eye lid malignant tumor requires extensive excision and reconstruction. Radicality is the most important operative treatment. The modality to restore the defect can be vary from simple skin graft, local flap, pedicle island flap or free vascularized flap. We reported a case of male 82 y.o. suffered from left upper and lower eye lid tumor. Wide excision was taken radically up to the periosteum of lateral eye socket. The eye ball was preserved since the visual acuity still normal. The defect wide was 10x15 cm. Lateral forehead flap reconstruction was done. Full thickness skin grafting was used to cover donor site in forehead region. The tumor was confirmed as squamous cell carcinoma, with free tumor margin incision. One month after procedure, the flap was viable, followed with eye lid reconstruction. Visual acuity function normally. Six months follow up, there is no local recurrence.

Keywords
squamous cell carcinoma, eye lid tumor, fore head flap.

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/Xjv732YRHuEG

Corresponding Author
Satriya Manggala Liastra

Institutions
Muhammadiyah University of Surabaya

Abstract
According to the survey in 2016 the death rate caused by negligence reached 1.4 million people in Indonesia. One of the negligence was caused by a blood type checker which were still manually done and high risk in human error. Goldarhes is a device to determine blood type with a light sensor with LDR and LED components and an Arduino microcontroller, then it showed the results on LCD. This device has never been used in Indonesian healthcare facilities. The Casing which is enviromental friendly material is made of corn husk waste containing cellulose, lignin, and hemicellulose. In addition, the energy power of the device itself uses a charging system so that it can reduce the amount of chemical waste that is difficult to decompose. The Methods of this research is True Experimental using 100 samples of participants. The results obtained will be displayed on the LCD which is processed in less than 10 seconds. The results of this research was faster than manually test, the mean of test period was take 5 seconds and the sensitivity of the tool is 95%. Thus “GOLDARHES” can be used as an effective, accurate, and fast medical device in determining blood type.

Keywords
Blood Type, Rhesus, Medical Device, Light Sensor, Android

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/BkVY7rHGXEpb

Corresponding Author
Ramadoni Syahputra

Institutions
Electrical Engineering Department, Universitas Muhammadiyah Yogyakarta

Abstract
This paper presents harmonic reduction using shunt active filter for hospital building electrical installation. Harmonic installation in electric power systems is caused by non-linear electrical loads, especially those containing coils, such as air conditioners, pump machines, fans, and others. Harmonic can cause excessive heat in a distribution transformer that supplies an electrical installation in a multi-storey building. This heat is a power loss and has the potential to shorten the life of a distribution transformer, so that efforts are needed to reduce harmonics. One effective method to reduce harmonics is to use active filters. In this study, a shunt active filter application in the electrical installation of a hospital building was carried out. The results showed that the filter was able to reduce harmonic currents significantly, so that the harmonic threshold was still in accordance with the IEEE standard.

Keywords
harmonic, shunt active filter, hospital building, power quality

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/VWnGr4KQe6my

Corresponding Author
Anna Nur Nazilah Chamim

Institutions
1, 2, 3 Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta, Yogyakarta, Indonesia;
4, 5 Department of D3 Nursing, Institut Teknologi Sains dan Kesehatan PKU Muhammadiyah Surakarta, Surakarta, Indonesia

Abstract
The heart is a vital human organ. Heart monitoring is needed to maintain health. At present, the device used to measure heart rate is a stethoscope. The bodys health can also be indicated by body temperature. The instrument for measuring body temperature is a thermometer. However, it is manual and involves humans in the measurement that may lead to measurement errors. To reduce measurement errors the result of the heart rate and body temperature monitoring was displayed on android and the web using Bluetooth HC-06 communication. This device also used the MLX90614 pulse sensor and infrared sensor connected to Arduino Pro Mini and Android Studio. Pulse sensor will detect heart rate, and infrared signal will detect body temperature. The sensor readings are sent to Arduino to be processed and it produces an output according to the conditions measured. The results of measurements are displayed on the Android interface via Bluetooth communication. The data are stored in a database and displayed on the application in a graphical form.

Keywords
heart rate, temperature, Arduino Pro Mini, Android, Bluetooth

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/7db4B6WtAvhD

Corresponding Author
Wisnu Kartika

Institutions
a) Department of Medical Electronics Technology, Universitas Muhammadiyah Yogyakarta
Jalan Brawijaya Tamantirto Kasihan Bantul, DIY, Indonesia
*wisnu2007[at]umy.ac.id
b) Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta
Jalan Brawijaya Tamantirto Kasihan Bantul, DIY, Indonesia

Abstract
Humidity and noise in the baby incubator is a parameter that must be maintained according to the BPFK (Health Facility Security Center) standard, which is fifty to sixty percent for humidity. Moisture needs to be maintained to maintain the stability of the babys body temperature. Therefore, the author intends to make a calibration tool for baby incubators (incubator analyzers) with moisture parameters. To measure the moisture content, the 808H5V5 sensor is used, while the minimum system used is Arduino Uno. The test method used to see the performance of this tool is to compare the values in the humidity of the TA module, the incubator analyzer with a comparison (Temperature Humidity Meter). At the humidity reading the error value is below two percent, where the biggest error is in the measurement value of thirty seven Celcius degree which is one point fifty six percent. The tool is functioning properly as an incubator analyzer because it has an error below tolerance of approximately five percent.

Keywords
Baby Incubator; Humidity; Sensor

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/D8qUm4fJjGWw

Corresponding Author
Herianus Manimoy

Institutions
Department of Chemistry, Faculty of Science, Institut Teknologi Sepuluh Nopember, Surabaya - Indonesia

Abstract
Chitosan, a hydrocarbon-based natural polymer, normally has good thermal stability. However, its hydrophilic characteristic limits its application as a membrane. The addition of anhydrous phthalates is expected to improve other physical properties. In this study, composite membranes were fabricated using the modified chitosan matrices combined with filler of modified materials, i.e., by CNT and MMT. FTIR spectra of the matrices shows peak at 1656.91 cm-1 which show amide functional group resulted from the conversion of amine of phthalate groups at phatalic anhydride. In pristine chitosan spectrum, the peak is not available. The modified filler shows a 3450 cm-1 peak which show hydrogen bond formed among internal interactions of the modifier. The XRD diffractogram of pristine chitosan shows three highest intensity peaks at 2θ of 609.2, 609.88, and 550 while anhydrous phthalate-modified chitosan shows the peak at 2θ of 609.8. The related diffractogram for the filler shows the peak at 2θ of 215,93 and 234,83. The addition of anhydrous phthalate to chitosan together with the use of CNT-MMT clearly reduce its crystallinity leading to improvement hydrophilic characteristic of the membrane. The results of this study expected to be one of the references in research regarding the fabrication of chitosan-anhydrous phthalate-based composite membranes for DMFC applications.

Keywords
Chitosan-Phthalic anhydride; CNT-MMT; Membrane DMFC

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/pPUxZ2aDF4LY

Corresponding Author
Pinasti Utami

Institutions
School of Pharmacy
Universitas Muhammadiyah Yogyakarta, Yogyakarta, Indonesia

Abstract
Pregnant women have special characteristics in the use of drugs so requiring more attention in the administration. The use of drugs outside the information listed in the leaflet or "off-label" has a risk when used by special populations such as pregnant women. This study aimed to determine the identification of off-label drug use indicated for pregnant women in hospitals. This study conducted using descriptive observational design with cross-sectional approach. The sampling in this study used retrospective method on medical records of pregnant woman of Rumah Sakit Jogja. The medical record samples of 298 were taken using systematic random sampling technique from January to December 2016. The samples were then analyzed based on the information of drugs listed on the PIO Nas [National Drug Information Center] and related journals. The result showed that there were 2075 prescribed drugs in which there were 98 prescribed drugs (4,72%) categorized as off-label drug indication. The off-label drug indication use included misoprostol 79 (3,81%), dexamethasone 16 prescribed (0,77%), and ondansetron 3 prescribed (0,14%).

Keywords
off-label drug, indication, pregnant woman

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/PYMnk6FgwcVy

Corresponding Author
Yessi Jusman

Institutions
(1) Universitas Muhammadiyah Yogyakarta, Indonesia
(2) Universiti Sains Malaysia, Malaysia

Abstract
Abstract This study aims to quantify the corrosion of steel reinforcing bar (rebar) in concrete structures using ground penetrating radar (GPR) and image processing techniques. A method to accelerate corrosion of steel rebars in concrete slab to different level of corrosion is applied. The power supply and the electrolyte are used to induce significant corrosion within a short period of time. The 2 GHz GPR is used to assess the corrosion in the reinforced concrete slab after 28 days of standard moist preservation. GPR method has been found to be useful for quantifying steel corrosion on existing concrete slab. The image processing techniques were used to process the GPR data. The results of the analysis of the GPR data shows that corrosion of the rebars could be detected. The subsequent image processing technique exhibits that corrosion of the rebars could be appropriate quantified.

Keywords
Corrosion, concrete, GPR, image processing

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/N2AwePXbznjW

Corresponding Author
Yessi Jusman

Institutions
Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta, Bantul, Daerah Istimewa Yogyakarta

Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta, Bantul, Daerah Istimewa Yogyakarta

School of Civil Engineering, Universiti Sains Malaysia, Penang, Malaysia

Abstract
This study aims to quantify the corrosion of steel reinforcing bar (rebar) in concrete structures using ground penetrating radar (GPR) and image processing techniques. A method to accelerate corrosion of steel rebars in concrete slab to different level of corrosion is applied. The power supply and the electrolyte are used to induce significant corrosion within a short period of time. The 2 GHz GPR is used to assess the corrosion in the reinforced concrete slab after 28 days of standard moist preservation. GPR method has been found to be useful for quantifying steel corrosion on existing concrete slab. The image processing techniques were used to process the GPR data. The results of the analysis of the GPR data shows that corrosion of the rebars could be detected. The subsequent image processing technique exhibits that corrosion of the rebars could be appropriate quantified.

Keywords
Steel rebar; structure; GPR; Image processing; Classification

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/TFeL2Rb9aqEf

Corresponding Author
Agung Nugroho Setiawan

Institutions
Poltekkes Kemenkes Semarang, Indonesia
Jalan Tirto Agung Pedalangan Banyumanik Semarang
* masrochah[at]yahoo.co.id

Abstract
Abdominal tumors due to malignancy in the liver often occurred in Abdomen CT Scan patients. To obtain a good and accurate image quality can be done by setting the scan delay and windowing. The purpose of this study is to determine the values that fulfilled the radiation protection aspects. This research is quantitative research with the experimental approach the research is done in Telogorejo Hospital in Semarang by using 40 samples with 5 scan delay times (60; 65; 70; 75; 80 seconds). The results calculated by ROI on the object and analyzed by Friedman tests. The results showed a difference in image quality (p-value = 0.02). The results of dose calculations showed an increase in dose for each additional scan delay time. This is consistent with the results of statistical tests (y = 1,181x + 20,025 with R² = 0.8506), which means that the dose increase is caused by scan time delay. Suggest for getting the optimal image quality with 70 seconds scan delay and the maximum scan delay with 75 seconds is still accepted for patients. The radiation dose is 24,54 mGy with maximum scan delay, which under the regulation of Bapeten and safe for the patients.

Keywords
Abdomen CT Scan, Scan Delay, windowing, Radiation Dose

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/UpEXbALD864w

Corresponding Author
Sri Nabawiyati Nurul Makiyah

Institutions
a) Histology and Cell Biology Department, School of Medicine, Faculty of Medicine and Health Sciences,
Universitas Muhammadiyah Yogyakarta, Daerah Istimewa Yogyakarta, Indonesia
b) School of Pharmacy, Faculty of Medicine and Health Sciences, Universitas Muhammadiyah Yogyakarta, Daerah Istimewa Yogyakarta, Indonesia
c) Parasitology Department, School of Medicine, Faculty of Medicine and Health Sciences,
Universitas Muhammadiyah Yogyakarta, Daerah Istimewa Yogyakarta, Indonesia

corresponding author: nurul_makiyah[at]umy.ac.id

Abstract
Steroid saponin in the tuber of Dioscorea alata L. has the potential to have immunomodu-latory activity. The purpose of this study was to examine the immunomodulatory activity of steroid saponins in Dioscorea alata L. tubers in silico. This observational study was conducted using steroid saponin compounds as a result of GC-MS test N-hexan extract, Clionasterol with comparison of native ligand (Celecoxib) which was carried out molecular docking using COX-2 receptors with Chimera software. The docking process uses a protein with the code: 3LN1, which is the active side of the COX-2 receptor which binds to celecoxib (a drug that selectively binds to the COX-2 receptor). Validation results between COX-2 receptor proteins binding to native Ligand (Celecoxib) show Lower Bond RMSD values &

Keywords
Steroid Saponins, Dioscorea alata L., in silico, immunomodulators, Clionasterol

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/w6f8Wn3XDqvF

Corresponding Author
Faaris Mujaahid

Institutions
Universitas Muhammadiyah Yogyakarta

Abstract
Harvesting the energy from solar has been growing significantly in the past decades. It enlarges the utilization of solar system technology, such as photovoltaic system, not only in the large-scale application, but also in the home-scale application. Indonesia is known for traditional batik clothing. There are a lot of various batik from different cities in Indonesia, and Yogyakarta is one of them. This paper reports the utilization of photovoltaic system in home-scale batik industry in Yogyakarta. The objective is to investigate the system whether there will be an extra power generated from the photovoltaic if a reflector is applied to the panel. There are two kinds of reflectors used in this experiment, they are mirror glass and aluminium foil. The experiment was conducted in the day where the amount of solar radiation are in the same intensity among three conditions; system without reflector, system with mirror glass reflector, and system with aluminium foil reflector. The result shows that in average the system with reflector has produced higher output power compared to the system without the reflector.

Keywords
Photovoltaic system, reflector, mirror glass, aluminium foil, batik industry

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/jNVwJycC2n3M

Corresponding Author
Agung Terminanto

Institutions
a,b) Computer Science, Faculty of Computer Science, Universitas Indonesia,, Depok, Indonesia
* agung.terminanto[at]gmail.com
c) Industrial Engineering, Universitas Pancasila, Department of Engineering, Jakarta, Indonesia

Abstract
ERP (Enterprise Resource Planning) is an integrated information system to manage a company-s business processes. Small and Medium Enterprise (SME) needs ERP but lack the funds necessary. Open Source System ERP (OSS ERP) becomes the choice for applying ERP by SMEs for the price and customizability. This research aims to identify the characteristics and configuration of purchase and warehouse module at PT. ANS using OSS ERP. PT ANS produces racking system and safety door selling products. In the actual business process is done semi-manually, the process of creating reports using Microsoft Excel. The problem that is often faced is the frequent delay in making reports and the stock of goods with physical raw materials is not the same. Currently, the warehouse process is still done manually and the procurement of goods has not been computerized, thus causing delays in data transmission from one part to another. To improve the purchase and warehouse process in PT ANS, a system that supports the integration of each part is needed. Data integration with Enterprise Resource Planning (ERP) system implementation is expected to help the purchase and warehouse process to be more efficient. The selected OSS ERP system is Odoo, as it is an open source ERP application that has various business application modules. This study using RAD (Rapid Application Development) to deploy an ERP system. There are 3 main components of the RAD method, namely Requirement Planning, Process Design System, Implementation. Business Process Modeling Notation (BPMN) is used to create business process analysis and modeling so that PT ANS performance can be improved. The result shows that there was efficiency in business processes and information systems have one integrated database and work efficiency in business processes in the warehouse division. The actual business process that was originally carried out in the 100-minute business process, with the ERP system can be done to 33 minutes, more 67% efficiency.

Keywords
Enterprise Resource Planning, Open Source, Odoo, Warehouse, SMEs

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/ARD4dbxe3uyT

Corresponding Author
Asroni Sukirman

Institutions
a) Department of Information Technology Faculty of Engineering Universitas Muhammadiyah Yogyakarta
Jl. Brawijaya, Kasihan, Bantul Yogyakarta 55183
*asroni[at]umy.ac.id
b) Department of Information Technology Faculty of Engineering Universitas Muhammadiyah Yogyakarta
Jl. Brawijaya, Kasihan, Bantul Yogyakarta 55183
c) Department of Information Technology Faculty of Engineering Universitas Muhammadiyah Yogyakarta
Jl. Brawijaya, Kasihan, Bantul Yogyakarta 55183

Abstract
Data is Information that has not been processed or manipulated, which is not enough for some users. So that the info is useful, the data needs to be prepared and integrated first to become information. Universitas Muhammadiyah Yogyakarta has a tool to monitor data on Alumni namely Tracer Study. The data currently available is still not integrated and processed correctly. Now there is a solution for processing data and data by making base data. The purpose of creating this database is to facilitate users in checking data, data that will be stored neatly and integrated into the computer. The method in this study uses the Single DDS method. Methodology This research starts from determining the subject of investigation, primary needs, creating baseline data, analyzing results. The backstage of need is carried out with two data analyzes, and interviews with LPKA (Lembaga Pengelola Kemahasiswaan dan Alumni or Students and Alumni Management Institutions). Baseline data making in this study is single DDS which has two data store namely Stage and DDS. Data analysis is done by creating reports with Microsoft Office Excel according to user needs. The testing phase is carried out with two processes, namely: ETL Testing and Functional Testing.

Keywords
Data Warehouse, Alumni, Tracer Study, Single DDS Architecture

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/A8MYHjcwFrJ9

Corresponding Author
Fizar Syafaat

Institutions
Institut Teknologi Sepuluh Nopember Jalan Raya ITS, Keputih, Sukolilo, Surabaya, Jawa Timur 60111

Abstract
Transportation plays a key role in peoples lives, changing views and having a big social and economic growth. In addition, technological developments are also related to social and economic growth, thus the Intelligent Transport System (ITS) has evolved rapidly towards social and economic conditions at this time. The biggest problem with the development of transportation at this time is congestion and even congestion itself has become a matter of greater concern at this time. The more vehicle growth, the more competition that is carried out by factories by promoting the vehicles they make and there are no clear rules for increasing the growth of vehicles. There are several factors that cause congestion starting from population growth in cities that are increasing day by day, roads that are smaller than the volume of vehicles up to traffic accidents are also one of the bottlenecks themselves even the government that provides road facilities. In this study, the application of a dynamic system to model the formulation of vehicle estimation problems and propose information systems and technology strategies that can be used to support solutions to solve problems revealed according to needs. The results of this study are to create a sub-model by simulating vehicle development and congestion levels in urban areas can take a number of references from previous studies so that it can affect the decrease in congestion by increasing the efficiency and effectiveness of driving by implementing a dynamic system.

Keywords
Dynamic System, Intelligent Transportation System

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/jv4UFKMJe76q

Corresponding Author
Ramadoni Syahputra

Institutions
(a*) Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta, Indonesia
*ramadoni[at]umy.ac.id
(b) Department of Electrical Engineering and Information Technology, Universitas Gadjah Mada, Indonesia

Abstract
This paper proposes implementation of electrical batik stove for green batik industry. Batik is the process of writing a picture on a piece of cloth by using wax batik as a color barrier. In the process of making batik, the stove is a very important tool to heat the wax until it melts. The melted wax is used to make a picture with a certain pattern on the white cloth. So far the stove technology used is kerosene-fueled stoves. The stoves produce smoke pollution which disrupts batik production houses. The smoke produced by kerosene stoves contains CO, CO2, NO2, and SO2. In addition, kerosene is often rare and prices tend to be more expensive. Therefore, in this study electrical stove was carried out for the batik production. In implementation, technical and economic analysis has been carried out. Technical analysis is done by comparing the quality of the results of kerosene and electrical batik stove stoves. Furthermore economic analysis is done by comparing the production costs for the two types of batik stoves. The results showed that technically the quality of batik candles melted using electrical stove was better and the temperature was more stable. The results of economic analysis also show that the production costs using electrical stove are much lower.

Keywords
Electrical stove; batik; green industry

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/3tVbhU6pzq8X

Corresponding Author
YUDHA IRLA SAPUTRA

Institutions
Master Of Hospital Management
Universitas Muhammadiyah Yogyakarta

Abstract
IMPLEMENTATION OF NURSE-PHYSICIAN EFFECTIVE COMMUNCATION VIA TELEPHONE IN HOSPITALIZATION ROOM OF BANTUL X HOSPITAL Yudha Irla Saputra, Sri Sundari Master Of Hospital Management Universitas Muhammadiyah Yogyakarta ABSTRACT Effective, timely, accurate, complete, clear, and understood communication by the recipient will reduce errors and improve patient safety. One method of effective communication is SBAR communication (Situation, Background, Assessment, Recommendation). This study aims to provide an overview of the effective communication of nurse- physicians by telephone. The study was conducted with a descriptive observational study approach to nurses in the hospitalization room. Measurement of frequency of implementation of nurse and doctor communication via telephone was using the SBAR communication sheet and survey using a questionnaire. The results of this study found that component A (Assessment) is a component of SBAR communication with the lowest frequency (32%) and the highest is R (Recommendation) 100%. Problem experienced by nurses when communicating with physicians include nurses who anticipate when physicians are not happy or offended when called (22%), physicians do not consider nurses views when making decisions about patients (16%) and nurses do not have enough time to say something to physicians ( 16%). This study shows that SBAR communication has not reached 100% and the making of SOP (Standard Operating Procedures) is one solution to improve SBAR communication. Bantul X Hospital already has an SOP related to SBAR communication but its implementation is not good enough. Keywords: effective communication, SBAR, nurses, doctors

Keywords
effective communication, SBAR, nurses, doctors

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/2wLYRcuqMb74

Corresponding Author
Arum Sari Asmoro

Institutions
1Program Studi Magister Manajemen Rumah Sakit, Program Pasca Sarjana Universitas Muhammadiyah Yogyakarta
2Program Studi Magister Manajemen Rumah Sakit, Program Pasca Sarjana Universitas Muhammadiyah Yogyakarta

Abstract
Background: Patient safety is a crucial issue and a focus of policy standard in internationally accredited organizations. Patient identification (ID) errors can disrupt care and harm patients in virtually every facet of clinical medicine, including diagnostic testing, medication administration, and even billing. Method: A medical librarian performed searches of PubMed, MEDLINE and the Patient Safety Network to identify relevant studies published from January 2008 to October 2018. We used medical-subject keywords : Identification patients, medical errors, patient safety, medication errors. Sorting articles through abstracts and free full text articles. Results: A total of 57 articles about the importance of patient safety in patient identification, 20 articles including inclusion criteria. Journals including inclusion criteria discuss the effectiveness of bracelet identification models, patient safety through patient identification. Many nurse, doctors and technician in clinical settings still found a patient identification culture carried out by health workers such as medical staff and paramedics who are not right. Conclusion: Implementation of patients identification by nurse, doctors and technician in clinical settings have not done properly still far from expectations. Therefore management must to evaluate and monitors routine implementation of patients identification at the hospital to civilize the officers to identify patients become a culture that is usually done by nurse, doctors and technician in clinical settings.

Keywords
Keywords : Patient Identification, Patient Safety

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/zTpMFn2G9Q7W

Corresponding Author
Tripitara Mahanggoro

Institutions
Physiology Department, Faculty of Medicine and Health Sciences
Universitas Muhammadiyah Yogyakarta
Email: mastripitara[at]yahoo.com

Abstract
Healthy is influenced by various factors, such as diet, physical activity pattern and non physical, mindset, and behavior pattern. Healthy behavior is determined by the way a person behaves. Some of the factors that influence the formation of a healthy lifestyle include individual insights, environment, culture, beliefs, information media, institutions, religion, residence and emotions. Ability in control is determined by the condition of emotional intelligence. Emotional intelligence is believed to be the main basis in realizing the ability of self-management. Good self-management encourages to determine the formation of a healthy attitude Based on the above background it is important to examine the formation of a healthy lifestyle with emotional intelligence. This study aims to determine the formation of a healthy life attitude with emotional intelligence. Respondents in this study were grouped into control group and treatment group, each group of 10 employees. The control group and the treatment group tested the emotional intelligence as well as the healthy life attitude with the questionnaire. This measurement is carried out before and after the treatment. Treatment groups were given emotional intelligence training for 4 stages. Each stages 3 face-to-face sessions in the meeting room. The result of One Sample Kolmogorov-Smirnov Test and Pair Sample Test showed that after training treatment there was a significant increase of emotional intelligence (p = 0,002) and healthy life attitude (p = 0,010). The result of linear regression analysis showed very strong correlation (R = 0,800) and there was significant correlation correlation (p = 0,005) between emotional intelligence to the increasing of healthy life attitude in factory employees. Healthy life attitude on factory employees can be formed with emotional intelligence.

Keywords
emotional intelligence; attitude of healthy living.

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/nc8RMfU36Qmb

Corresponding Author
Namira Nurmalatya

Institutions
School of Business and Management, Bandung Institute of Technology, Indonesia

Abstract
PT Kapal Darya is the foremost provider of roll-on/roll-off ferry transport services in Indonesia that takes upon the responsibility of ensuring affordable sea transportation and logistics for the public throughout the archipelago. They always commit to drive an increase performance of the company and contribution to the country as well. One of the things that can affect company performance is the procurement process. Unfortunately, currently the procurement process in PT Kapal Darya still exceeds that target completion time. The delayed in the procurement process will certainly have an impact such as delay the project implementation which further increases costs, leads to poor project execution performance and delays the delivery of benefits to the beneficiaries. Therefore, this thesis aims to analyse the problems that occur and propose solution that can improve the procurement process and increase the efficiency. The main concept that will be used is Lean Six Sigma with DMAIC framework. The improvements that can be implemented to increase the efficiency of procurement process is the use of E-Procurement application which also covers the developing of Vendor Management Systems. This solution has several benefits such as increase transparency and accountability, supports the process of monitoring, tracking and reminder, and also meet the real time access to information needs.

Keywords
Procurement Process; Lean Six Sigma; E-Procurement

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/AVkTzdcWuZt2

Corresponding Author
Wahyudi Wahyudi

Institutions
Universitas Muhammadiyah Yogyakarta

Abstract
The need for biodiesel as an alternative fuel will increase along with the increasing energy consumptions and the depletion of fossil fuel reserves. Jatropha oil and soybean oil are potential raw materials for biodiesel. Each raw material gives different properties to biodiesel. Mixing the two types of oil makes it possible to improve the quality of biodiesel. The aim of this study was to determine the effect of variations in the composition of the oil mixture on the biodiesel properties. Jatropha oil was mixed with soybean oil in various compositions. The mixture was heated and stirred for 60 min at 90oC. The more the percentage of soybean oil biodiesel, the viscosity of the biodiesel mixture decreased. Mixing with 20% soybean oil has a significant reduction in viscosity. The increasing percentage of soybean oil also influences the higher heating value of the biodiesel mixture.

Keywords
heating value; viscosity; jatropha oil; soybean oil;biodiesel

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/Z4VbHkDPRfQq

Corresponding Author
Ayu Satya Karuniawati

Institutions
Institut teknologi Bandung

Abstract
PT Coalnesia is one of the largest coal mining companies in Indonesia, with sales in the domestic market of approximately 60% of total sales and about 70% are supplies for electricity generation needs. At this moment, the government also has 35,000 megawatt power plant development program, which is the potential to increase sales with new customers. The relationship between PT Coalnesia and its customers in the domestic market has been established for decades. However, this does not guarantee that PT Coalnesia is the first choice of its customers. PT Coalnesia needs to set a strategy to differentiate its services from other companies. In this study, the author used a qualitative methode by conducting interviews of 3 customers and 2 internal employees. In addition, the author also did observation during 3 months internship in this company and use secondary data to support this research. As a strategy to evaluate the services of PT Coalnesia, author have used Customer typology using Apostles Model and The Six Pillar of Customer Experience. The result indicates that PT Coalnesia needs to implement a new marketing strategy that prioritizes service. PT Coalnesia can use Service Excellence Method as a reference in providing services to customers.

Keywords
Coal Industry, Indonesia coal market, customer satisfaction, service excellence

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/2XgcDFzeqjy6

Corresponding Author
Alfan Sarifudin

Institutions
1, 2, 3 Department of Mechanical Engineering Education, Faculty of Teacher Training and Education, Universitas Sebelas Maret

Abstract
The vortex tube or Raque Hilsch Vortex Tube (RHVT) is a heat pump acts as a cooling machine which utilizes the phenomenon of compressed vortex air flow in the tube. Vortex tube is considered environmentally friendly since it operates without Freon refrigerant. However, it is found that the coefficient of performance refrigeration (COPref) is still low compared to conventional Freon-based cooling machines due to movement of hot and cold air by convection. This research proposes forced cooling in a tube by flowing water to the surface of a hot tube to inhibit convection. The flow rate of water for forced cooling is 3liters/minute. It is known that pressure and fraction are parameters that influence vortex tube performance, so tube type testing is carried out with a pressure variation of 0.5-1.5bar and a fraction of 30%-70%. With the forced cooling method on the vortex tube hot tube, the cold temperatures released were getting colder by 0.9oC until 2.5oC so that the COPref increases up to 45%. The most optimal COPref is -0,123 occurs on forced vortex tube, 0.5bar pressure, and 70% fraction and the most optimal of cold temperature is 13.45oC occurs on forced vortex tube, 1.5bar pressure, and 40% fraction.

Keywords
coefficient of performance refrigeration (COPref), zero global warming potential (0GPW), heat pump, Raque Hilsch Vortex Tube (RHVT)

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/Rf2brBevF4H6

Corresponding Author
IRENG SIGIT ATMANTO

Institutions
a) PSD 3 TeknikMesin, SekolahVokasi,UniversitasDiponegoro,.
b) PSD 3 Teknik Kimia, SekolahVokasi, UniversitasDiponegoro.
c) JurusanTeknik Kimia, FakultasTeknik, UniversitasDiponegoro.

Abstract
There are myriad of avenues can be done to process the agricultural products to be more varied final products without neglecting the food safety standard. A shelf life and shelf life preservation should be the priorities in food processing. One method usually done to increase the shelf life of a food product is by preservation. The preservation method which is conducted by small, medium and advanced scale industries involve physical treatments including heating, drying, cooling and freezing, and adding chemical substances. Preservation is also executed through a combination method that is by mixing those aforesaid methods in one running process of preservation. Carica (Vasconcellea pubescens) is a primary commodity of the agricultural sector on the Kejajar Village, Wonosobo, Central Java, in which the village is situated in Dieng Plateau. Carica has a unique flavor, distinctive aroma, and chewy flesh. However, Carica is vulnerably fragile regarding its shelf life. Due to its fragility, it is impossible to store the Carica in fresh condition for a long period. Therefore, advance food processing is necessarily needed to extend its shelf life, to make it more practical in terms of consumption, and to improve its economic value in terms of business. Sunrise is one of the developed medium scale enterprises which focuses on processing Carica fruits to be Carica sweets in Dieng, Wonosobo. The society service program aims for 1) applying an appropriate technology in medium scale industry of Carica fruit processing, 2) examining the effectuality of the appropriate technology application in influencing the length of the boiling process and improving the quality of Carica Sweets.

Keywords
Carica, Extractor, Quality

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/CZHQA9rzanw8

Corresponding Author
Roshynta Linggar Andatu

Institutions
Master of Hospital Management, Postgraduate Studies, Universitas Muhammadiyah Yogyakarta

Abstract
Background: Informed consent is an ethical and legal obligation to perform invasive procedure, given by the healthcare worker to the patient or family, part of patient safety implementation. Objective: To identify and describe qualitatively on how to increase healthcare worker compliance on informed consent. Methods: Systematic searches of the literature were conducted using the major database, PubMed, by typing keywords (example compliance, healthcare worker, doctors, informed consent, agreement) which published from 2015 to January 2019. We summarized and analyzed the factors, intervention, and approach that can be used to increase healthcare worker compliance on informed consent. Results: We identified 25 systematic review journals from 2015 to 2019. Most of the studies were in hospitals and the population consisted of doctors, dentists, nurses, and pharmacists. Factors that influence the compliance of healthcare worker in implementing informed consent include self-confidence, habits, knowledge, ability, gender, age, empathy, workload, socio-cultural, and health system. The interventions that can improve the compliance of healthcare worker in implementing of informed consent, in terms of education combined with audits and feedback, remind each other between healthcare worker, psychological interventions, attitudes and behaviour, compare pre and post, and monitoring. Conclusions: Healthcare worker compliance on informed consent influenced by socio-culture, workload, gender, knowledge, and ability. To improve compliance, it is necessary to conduct audits, feedback and improve cognitive behavior.

Keywords
Compliance, healthcare worker, informed consent

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/2hLQ48yvGDt7

Corresponding Author
Mala Rosa Aprillya

Institutions
Institut Teknologi Sepuluh Nopember

Abstract
Food security is the ability of a country in ensuring availability, accessibility, and utilization of rice to the society are stable. Food security problems affecting many developing countries. Food security is affected by factors interacting, like population, climate change, natural disasters and the problem of the conversion of agricultural land. Rice is one of the three most important grain crops in the world and has great contributions to meet the food needs of the world. Paddy (Oryza Sativa L.) is the main food plant for the majority of the population of Indonesia. Most people in Indonesia choose rice as a staple food and the main source of carbohydrates. With an increasing population, this increase will affect food needs. Recorded rate of population growth of East Java from 2010 to 2017 of 0.64% (BPS, 2017) and consumption of rice 213,783 Tons in 2018 (BPS, 2018). Because of the availability of rice for the fulfillment of food should be improved in maintaining food security efforts. The purpose of this research is to analyze the factors that affect the quality of paddy production in the handling of harvest and postharvest using a system dynamics model approach. System Dynamics is a very suitable approach because it is based on the feedback in one part of the system that affects the part of the other. This can generally be described as the food security system. The results of simulations can be used as the basis for planning the strategy policy helps the Government in improving food security through a few scenarios such as land intensification, expansion of new agricultural land, increase the application of modern tools postproduction and equipment Smart Agriculture can help in increasing the production quality of paddy. This research can be used as a reference for the creation of strategies in improving the production quality of paddy in food security.

Keywords
Food security, Paddy, Rice, System Dynamics

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/k7FQEVpXBHZ9

Corresponding Author
Dewi Rokhmah

Institutions
1,2Enviroment and Occupational Health Department, Public Health Faculty, University of Jember
3Health Promotion and Behavior Science Department, Public Health Faculty, University of Jember

Abstract
Cigarette smoke is a complex mixture of gases and particles that contain many carcinogenic and toxic compounds, which is the result of smoke in the room. One way to solve the problem of smoking in the room is the implementation of SFA regulation. This regulation is very important to reduce air pollution caused by cigarette smoke and reduce the harm of smoking and provide healthy air to the community. There are seven areas covered by SFA regulation. Therefore it is very important to know about "What is the 7th public places containing air pollution caused by cigarette smoke so that the necessary implementing legislation SFA in Jember?". The aim of this study is to monitor the air quality in areas which are covered by SFA regulation in Jember, with details of the following specific objectives: Measuring the concentration of particulate matter (PM2.5) in places which are covered by SFA regulation, as well as proving their smoking activities affect the poor indoor air quality. This study is a descriptive cross-sectional study design using regional monitoring and observation. The study population is SFA that located in Jember. The total sample is 100 public places. Samples were selected purposively with the criteria area frequented by the general public, is a place whose existence to the characteristics of a city (icon). The air quality is measured by PM2.5 monitoring will be done in the building for at least 1 hour with the first 15 minutes of the procedure outside the building, 30 minutes in the final 15 minutes of the building and back outside the building. The results showed that there were 56% of the 100 public places that have air quality above the threshold the WHO standard is 25 ppm. Public areas in question consists of; hotel, office, modern markets, traditional markets, health centers, restaurants, terminals, hospitals, places of worship, educational facilities, entertainment venues, and other public places. From an average of PM 2.5 measurement result, traditional markets and entertainment venues occupy first and second place for air quality above the threshold the WHO standard (25 ppm), which amounted to 69.2 ppm and 60.6 ppm. While the lower level of education facilities has cleaner air quality according to the WHO standard is 18.4 ppm. From this study it can be concluded that most of the area public places in Jember have poor indoor air quality that is above the standard threshold of WHO. This is due to the policy of SFA in Jember. Efforts are required to advocate for SFA regulation in Jember in order to protect the publics right of non smokers to breathe clean and healthy air at the public facility.

Keywords
Indoor Air Quality Monitoring, Public Space, Advocacy, Smoke Free Area (SFA)

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/BcvDVMWRKuYe

Corresponding Author
Ramadoni Syahputra

Institutions
(a) Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta, Indonesia, *Email: ramadoni[at]umy.ac.id
(b) Department of Electrical Engineering and Information Technology, Universitas Gadjah Mada, Indonesia

Abstract
This paper presents a study of induction motor fault detection using motor current signature analysis technique. Nowadays, the three-phase squirrel cage induction motor became the key element in all industrial plants. The advantage of using this type of motor is that the construction is simple and almost without maintenance. In long-term operations, induction motors can experience interference that can inhibit the production process and have an impact on decreasing productivity and financial losses. To prevent these adverse effects, well-planned maintenance and monitoring are needed. The monitoring system needed is a condition monitoring system that can predict and identify pre-fault conditions so that it is useful to prevent the time of unwanted damage. Motor current signature analysis (MCSA) technique is a reliable technique for identifying induction motor pre-fault conditions. This study focuses on the experimental results of three phase induction motor monitoring to identify the condition of the rotor bar and the unbalanced stator current. Analysis of monitoring results is presented in this paper and several key variables related to motor damage are discussed.

Keywords
Induction motor, monitoring, MCSA, faults.

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/n7QCGNZDrpdc

Corresponding Author
Mia Mukti Rahayu

Institutions
Postgraduate Faculty
Muhammadiyah University of Yogyakarta

Abstract
Background: Nurses are the largest human resources that have an important role in health services in hospitals. The challenge that hospitals facing is how to achieve maximum nurse performance. The realization of nurses,s performance is influenced by leadership. Nurse,s performance can also be achieved by their commitment to the organization. Nurse,s performance can also be achieved if the nurse has satisfaction with their work. Objective: To find out the influence of leadership on the work performance of nurses in RSUD KRT Setjonegoro Wonosobo. Knowing the influence of organizational commitment on the work performance of nurses in RSUD KRT Setjonegoro Wonosobo. Knowing the effect of job satisfaction on the work performance of nurses in RSUD KRT Setjonegoro Wonosobo. Method: This study is inferential analytic research with a cross sectional approach. The study population was nurses in the RSUD KRT Setjonegoro Wonosobo. The sampling technique in this study was purposive sampling with a total sample of 56 people. Data was collected using a questionnaire. Data analysis used multiple regression analysis. Results: Leadership has a significant effect on the performance of nurses in RSUD KRT Setjonegoro Wonosobo (p = 0.039). Organizational commitment has a significant effect on the performance of nurses in RSUD KRT Setjonegoro Wonosobo (p = 0.018). Job satisfaction has a significant effect on the performance of nurses in RSUD KRT Setjonegoro Wonosobo (p = 0.026). Leadership, organizational commitment and job satisfaction have a significant effect on the performance of nurses in RSUD KRT Setjonegoro Wonosobo (p = 0,000). Conclusion: Leadership, organizational commitment and job satisfaction have influence in work performance of nurses in KRT Setjonegoro Hospital, Wonosobo.

Keywords
Leadership, organizational commitment, job satisfaction, performance, nurse

Topic
International Symposium of Engineering, Technology, and Health Sciences

Link: https://ifory.id/abstract/BNwLcyPfxQbR